- Non-emergency hours: (Mon - Fri 6am - 6pm) (Sat - 7am - 4pm)
Brush reduction, access creation, and clean closeout.
Every clearing project starts with a focused site walk to map access, utilities, slopes, and protected trees. Goals drive the plan: reclaiming overgrown lots, improving defensible space, or preparing for fencing, grading, or a new landscape. We coordinate utility locations, define, keep, and remove areas with flagging, and select equipment sized for the site to reduce ground disturbance. When rules or permits apply, we align work with local requirements and set erosion and debris handling from the start.
Execution combines saw crews with compact machines to remove brush, saplings, and understory selectively. Material is chipped for on-site mulch where appropriate or hauled off cleanly. We protect trees to remain, maintain sightlines near roads and drives, and shape access paths for future trades. At completion, surfaces are raked, piles consolidated, and stormwater paths cleared. The area is usable immediately and ready for grading, replanting, or inspections, with photo documentation available when helpful.
Unmanaged brush and saplings escalate wildfire exposure, block access, hide hazards, and slow permits. Clearing early keeps people safe, schedules intact, and budgets predictable—before storm season or construction deadlines force expensive, last-minute work.
Tall grass, ladder fuels, and dense understory carry embers into canopies and toward structures. Selective thinning, spacing, and chipping reduce ignition pathways and meet defensible-space guidelines, improving safety for homes, HOAs, and facilities as heat and wind conditions intensify.
Overgrowth restricts trucks, fencing crews, trenchers, and surveyors. Hidden stumps and debris damage equipment and fail pre-construction inspections. Planned clearing opens haul routes, establishes staging areas, and prevents standby charges, remobilization fees, and cascading schedule slips across trades.
Brush and debris clog culverts and swales, pushing stormwater toward foundations and drives. Roots and ruts accelerate erosion on slopes. Clearing sets storm paths, exposes problem grades, and enables simple erosion controls before the first serious rain arrives.
Blackberry, broom, and ivy overrun corridors, harbor rodents, and rebound aggressively after mowing. Clearing with targeted removal and follow-up suppression limits resprouts and keeps access corridors, fencelines, and easements maintainable without constant emergency callouts.
Land clearing is staged and surgical—protecting keep-trees, utilities, and soils while preparing sites for grading, replanting, or construction with predictable timelines and a clean handoff.
We define goals, walk slopes and boundaries, and flag keep/remove zones, utilities, and tree protection areas. Access routes, staging pads, and chip/haul plans are set up front so machines move efficiently and sensitive areas stay untouched throughout the operation.
Compact tracked loaders, mowers, and forestry heads match terrain and gate widths. Ground mats and plywood crossings protect asphalt, pavers, and lawns. Tight corridors get hand-cut first, then widened methodically to prevent ruts, soil displacement, and collateral damage to desirable vegetation.
Crews remove ladder fuels, brush, vines, and saplings while preserving structural trees and sightlines. Material is chipped for on-site mulch where appropriate or loaded out cleanly. Piles are consolidated away from roots and foundations to deter pests and keep inspections straightforward.
We open culverts, verify swales, and restore natural storm paths. Simple BMPs—wattle, silt fence, straw mulch—are installed on steeper grades as needed. The site is raked, access swept, and a brief photo log can document the scope for owners, HOAs, or inspectors.
A clean slate that protects soils, trees, and timelines.
Land clearing should open space without creating new problems. We begin by defining what stays and what goes—heritage trees, buffers, utilities, fences—then build a sequence that methodically widens access instead of tearing through. Machines travel on designated routes to limit compaction and rutting; sensitive roots get ground protection, and hand crews first handle the tight or delicate areas.
Material handling shapes the outcome. Brush is chipped as we move to keep work zones tidy and sightlines clear. Where useful, chips are spread thinly as temporary mulch for dust control and erosion resistance; where not, they’re loaded out so grades remain visible for surveyors and trades. Ladder fuels are reduced, but structure trees are retained for shade, stability, and long-term appeal.
Soil health and drainage matter as much as appearance. We work across contours on slopes to minimize scouring and add simple BMPs where needed. Culverts and swales are opened so stormwater flows where it should. If inspections are ahead, we keep markers visible and set staging pads for the next contractor.
The result is ready-to-use space—clean, safe, and thoughtfully prepared—so fencing, grading, or replanting can start without backtracking. That’s clear with purpose, not just horsepower.
Clean, compliant, ready for what’s next.
From overgrowth to workable space, we clear brush, saplings, and ladder fuels while protecting trees to remain, utilities, and soils. Access routes are planned, equipment is right-sized, and debris is chipped for mulch or hauled away to keep grades visible for surveyors and trades.
Our insured crews coordinate utility locates, flag keep/remove zones, and open culverts and swales so drainage works before the first rain. We install simple erosion controls where required and provide photo documentation for owners, HOAs, or inspectors. The result is a tidy, safe footprint that accelerates fencing, grading, replanting, and inspections—without backtracking.
Ready to schedule professional land clearing? Call 510-957-8733 or email office@cbctrees.com for a free, no-pressure on-site estimate. We serve homes, HOAs, facilities, and construction sites across the East Bay.
Our commitment is to keep projects safe, predictable, and high-quality from the first site visit to the final cleanup.
Clear scopes, straightforward options, and pricing you can validate. We explain access limits and disposal plans up front, then follow the agreed plan without surprise add-ons or vague line items.
Every job starts with a hazard review and role assignments. Crews use PPE, controlled drop zones, and industry-approved techniques to protect people, utilities, roofs, and neighboring properties throughout the work.
Compact lifts, cranes when required, and calibrated rigging allow precise control in tight spaces. We plan rope paths and anchor points to move wood safely without shock loading or collateral damage.
Ground mats, plywood shields, and careful staging protect lawns, beds, and hardscape. Debris is chipped or hauled, surfaces are blown clean, and we leave the area ready to use immediately.
Realistic timelines, confirmed arrival windows, and updates if conditions change. You will know who is coming, what they will do, and when the site will be finished and cleared.
Familiarity with protected-tree rules across East Bay cities helps projects proceed smoothly. We point you to the right forms, coordinate details, and align work plans with municipal requirements.
Brush is chipped for reuse when appropriate, logs are directed to responsible processing, and sites can keep mulch on request. We minimize waste and keep disposal pathways compliant.
Certificates of insurance available on request, plus photo documentation when helpful. Walkthroughs at completion ensure the scope was met, concerns are addressed, and expectations match the delivered result.
Call Us Today for More Information
========== o r ===========
